Select Page

What do the beeps during the Power-On Self-Test (POST) mean?

When a fault is detected during the Power-On Self-Test, you will not hear the normal startup chime. Instead, the system will beep as explained below.

Apple Logo

1 beep = No RAM installed/detected
2 beeps = Incompatible RAM type installed (for example, EDO)
3 beeps = No RAM banks passed memory testing
4 beeps = Bad checksum for the remainder of the boot ROM
5 beeps = Bad checksum for the ROM boot block

Of course if you experience one of these beeps, Apple wants you to call your Apple-authorized service provider for additional assistance.

The power-on self-test resides in the ROM of the computer. Only computers that are based on the ROM-in-RAM (New World) technology, such as the iMac, Power Macintosh G3 (Blue and White), Power Mac G4 (PCI Graphics), PowerBook (FireWire) and PowerBook G3 Series (Bronze keyboard) will generate these beeps. This test runs whenever the computer is powered on after being fully shut down (the power-on self-test does not run if the computer is only restarted).

The information in this article was found here!

Information on Macintosh Machines from 1999 and newer will be posted tomorrow. You will find it under “Macintosh POST Beeps Defined – Part 2.”